Existing Users: Because of an update to the forum software you will need to reset your password. Please use the "Forgot?" link on the sign in form to do so. If that doesn't work, send me an email at email@example.com and I'll sort you out!
Gratuitous Personal Request
Calling all motor people!
I have this boat. It weighs exactly one tonne. The factory advertises, and other users confirm, that a standard 50hp Tohatsu ('95 model) will take it to 20 knots. Indeed, it will only degrade one knot for every 50 kilos of extra weight, they say.
My experience is somewhat less than this, however. The best I have managed is 13 knots. Now it should be said that the thing does need a carby overhaul as there is some gunk in them after a period of prolonged storage. This is only holding the engine back from its potential maximum 5,800 rpm, to 4,900 rpm at 13 knots. It is hard to imagine that I'm going to get the extra 7 knots from 900 rpm, when I finally shell out for the overhaul/service.
When I bought the boat - and this is important - I had some work done on the motor that cost a bundle (which is why the other aint been done yet), and at the same time had the compressions checked. These are all still at the factory delivery tolerance, which is encouraging, and not where the performance problem is. Oh, and if it is important to know, it is oil injected, not pre-mix.
I want more power, so here comes the questions:
1. I notice that Shell is advertising a new 100 octane unleaded fuel. This has 5% methanol. I already use 97 so will the higher octane stuff provide more power? Will the ethanol cause me problems with carbies/reeds, etc?
2. Do these carby things come with an ECU of some sort, and can you change the ECU for more power?
3. What can I do (within reason) to increase the power out of the engine?
Why don't I get a new engine?
Well, they cost an effing fortune, that's why!
Apart from that, this is mainly a sailing boat, and I can cope with 78kgs hanging off the back - just. 150kgs for a 90hp four banger would make me die of embarrassment.
Come On - Help Me!
[Edited on 15/2/2006 by Lease]